There are two OrCAD Capture schematic files for 20 dBm and 10 dBm versions:

GP_P110_HW_20007_QPG6200_QFN32_EVB_20dBm_SCH.dsn
GP_P110_HW_20007_QPG6200_QFN32_EVB_10dBm_SCH.dsn

The reason is that OrCAD Capture does not allow to make a BOM variant with a different symbol. Only values are allowed to change. Thus two schematic files had to be created.

QPG6200 20 dBm and 10 dBm versions differ in:

- Pin VDDPA / GPIO18, thus, a different symbol for QPG6200 is needed to represent the pin difference.
- The RF Low-pass filter is 5-pole for 20 dBm and 3-pole for 10 dBm. Thus, the 10 dBm variant needs a 'shunt' 18pF 0201in capacitor instead of a coil as the last series component.

Use always the 20 dBm version as your source to update the layout.
