QPB0066
5 - 500 MHz Digital Controlled Variable Gain Amplifier
Last Time Buy >
End of Life announced September 11, 2023 (PCN 23-0133).
Last Time Buy: May 6, 2024
Contact your local sales representative for assistance.
Note: Any orders for Last Time Buy materials from Qorvo are considered non-cancellable, non-returnable.
Key Features
- 5 MHz to 500 MHz Operation
- Dual 6-Bit Digital Step Attenuator
- SPI Serial Control Programming
- Max Gain = 44 dB at 100 MHz
- Gain Control Range = 63 dB (0.5 dB Steps)
- High OIP3 / P1dB = +38 dBm / 22.6 dBm
- +5 V Supply for DSA and +8 V Supply for Amplifier with a Drop Resistor
- Small 28-Pin, 6.0 mm x 6.0 mm MCM
- Power-up Programming
| Mouser | 113 | Buy Online > | |
| RELL | 0 | Buy Online > |
The QPB0066 is a digital controlled variable gain amplifier featuring high linearity over the entire gain control range with noise figure less of 4.3 dB in its maximum gain state. The gain is controlled by the dual 6-bit digital step attenuators programmed with a 12-bit Serial Peripheral Interface (SPI). The module is easy to use with a few external DC blocks and RF chokes.
Typical Applications
- CATV Return Amp in Nodes and Amplifiers
- Transceiver IF DVA
- Cellular, PCS, GSM, UMTS
- Wireless Data, Satellite Terminals
- High Linearity Power Control
Product Categories
Application Categories
| Type | Upstream |
| Frequency Min(MHz) | 5 |
| Frequency Max(MHz) | 500 |
| Gain(dB) | 44 |
| NF(dB) | 4.3 |
| Voltage(V) | 5 |
| Current(mA) | 500 |
| Package Type | MCM |
| Package(mm) | 6.0 x 6.0 |
| RoHS | Yes |
| Lead Free | Yes |
| Halogen Free | Yes |
| ITAR Restricted | No |
| ECCN | 5A991B |