QPG6105
Multi-Standard Smart Home Communications Controller
End of Life announced March 12, 2026 (PCN 26-0025).
Last Time Buy: September 23, 2026
Contact your local sales representative for assistance.
Note: Any orders for Last Time Buy materials from Qorvo are considered non-cancellable, non-returnable.
Key Features
- ConcurrentConnect™ technology delivers superior multi-standard performance with a single radio
- Support for Zigbee, Thread, Matter, Bluetooth® Low Energy and Bluetooth® Mesh
- Support for secure boot, secure OTA software upgrade, and secure identity
- Easy-to-use development kit with reference applications and hardware designs
- 128 kB RAM and 1 MB Flash for advanced use-cases
- Greatly reduced Flash footprint due to offload to ROM
- Optimized connected lighting design BOM
- Antenna diversity increases effective range
QPG6105 is a low power communications controller implementing Zigbee®, Thread, Matter, Bluetooth® Low Energy and Bluetooth Mesh protocols. It features the hardware based ConcurrentConnect™ technology enabling multiple protocols to operate simultaneously, delivering improved capacity and enhanced interoperability with the leading low power standards.
The QPG6105 SoC and its software is Zigbee and Bluetooth Low Energy certified and a candidate for Matter v1.0 certification. The QPG6105 development kit is a one-stop shop for boards, software and documentation for easy product development. Additionally, connected lighting reference design is available to reduce time to market for customers.
Typical Applications
- Connected lighting
- Smart home sensors
- Smart home actuators
Product Categories
Application Categories
| Application | Connected Lighting, Sensors, Smart Home Controllers |
| Protocols | Zigbee, Thread, Matter, Bluetooth Low Energy |
| ConcurrentConnect Technologies | Multi-Channel, Multi-Radio, Antenna Diversity |
| Max Tx Power(dBm) | 10 |
| Rx Sensitivity(dBm) | -101 (802.15.4), -97 (BLE @ 1Mbps) |
| Tx Current(mA) | 38.8 @ 10 dBm |
| Rx Current(mA) | 5.6 (802.15.4), 10.4 (BLE) |
| Sleep Current(uA) | 1.3 to 2.0 |
| MCU | Arm Cortex-M4 with DSP, 64 MHz max |
| NVM Size(kB) | 1,024 |
| RAM Size(kB) | 128 |
| Security | Advanced Security Engine, Secure Boot, Secure OTA Update |
| GPIOs | 23 GPIO + 4 ANI |
| Package Type | QFN, 32-pin |
| Package(mm) | 4.0 x 4.0 |
| RoHS | Yes |
| Lead Free | Yes |
| Halogen Free | Yes |
| ITAR Restricted | No |
| ECCN | EAR99 |
IoT Dev Kit Pro – Multi-standard System using QPG6105 and QPG7015M (PN: QPG6105DK-02)
Key Features
- Complete system of a QPG6105 Matter device and a QPG7015M Thread Border Router integrated with a Raspberry Pi 4 host
- ConcurrentConnect™ technology for multi-standard use
- Matter™, Thread, Bluetooth® Low Energy and Zigbee certified
- Software API, RF performance tools and application guidelines to ease development
- PCB antennas to leverage ConcurrentConnect Antenna Diversity both on the gateway and connected device
- ConcurrentConnect Coexistence for WiFi and IoT on the gateway with configurability
Check out the IoT Dev Kit Pro Product Brief for an overview of the hardware features, software stacks and applications and tools included in the kit.
IoT Dev Kit for QPG6105 - Matter™ & Bluetooth® Low Energy Connected Devices (PN: QPG6105DK-01)
Key Features
- Development kit including hardware and software featuring ConcurrentConnect™ technology for multi-standard use
- Matter™, Thread and Bluetooth® Low Energy certified
- Matter app demonstrated without need of external Flash by offloading SW to ROM
- Matter and Thread open-source software integrated and extended with tools and development guidelines
- Small QPG6105 radio board with printed dual antennas to leverage ConcurrentConnect Antenna Diversity
- RF performance tools and sensors/peripherals for easy demonstration of QPG6105 capabilities
Check out the IoT Dev Kit for QPG6105 Product Brief for an overview of the hardware features, software stacks and applications and tools included in the kit.