RFDA0026
700 - 1035 MHz Serial Controlled Digital Variable Gain Amplifier, 6-Bit, 0.5 dB Steps
Discontinued >
End of Life announced July 29, 2019 (PCN 19-0127).
Last Time Buy February 1, 2020.
Contact your local sales representative for assistance.
Key Features
- Frequency Range 700MHz to 1035MHz
- Full Internal Matching and No External Bias Inductors
- 6-Bit Digital Step Attenuator
- SPI Serial Control Programming
- Max Gain = 32dB at 900MHz
- Gain Control Range = 31.5dB (0.5dB Step Size)
- High OIP3/P1dB = +40/23dBm
- Single +5V Supply
- Small 28-Pin, 6mm x 6mm, MCM
- Power-up Programming
| Mouser | 1050 | Buy Online > | |
| RFMW | 4500 | Buy Online > |
Qorvo's RFDA0026 is a digital controlled variable gain amplifier featuring high linearity over the entire gain control range with noise figure less than 4.1dB in its maximum gain state. The gain of the 6-bit digital step attenuator is programmed with a serial mode control interface (SPI). The RFDA0026 is packaged in a small 6mm x 6mm leadless laminate MCM, which contains plated through thermal vias for ultra low thermal resistance. This module is easy to use with no external matching components required.
Product Categories
Application Categories
| Frequency Min(MHz) | 700 |
| Frequency Max(MHz) | 1,035 |
| Attenuation Range(dB) | 31.5 |
| Gain @ 0 dB Atten(dB) | 32 |
| OP1dB(dBm) | 23.8 |
| OIP3(dBm) | 40 |
| Bits | 6 |
| NF(dB) | 4.1 |
| Voltage(V) | 5 |
| Current(mA) | 192 |
| Package Type | MCM |
| Package(mm) | 6 x 6 |
| ECCN | 5A991.G |