Qorvo's RFFC5071 is a reconfigurable frequency conversion device with integrated fractional-N phased locked loop (PLL) synthesizer, voltage controlled oscillator (VCO) and two high linearity mixers. The fractional-N synthesizer takes advantage of an advanced sigma-delta modulator that delivers ultra-fine step sizes and low spurious products. The PLL/VCO engine combined with an external loop filter allows the user to generate local oscillator (LO) signals from 85MHz to 4200MHz. The LO signal is buffered and routed to the integrated RF mixers which are used to convert frequencies ranging from 30MHz to 6000MHz. The mixer bias current is programmable and can be reduced for applications requiring lower power consumption. RFFC5071 can be configured to work as a signal sourcs by bypassing the integrated mixers. Device programming is achieved via a simple 3-wire serial interface. In addition, a unique programming mode allows up to four devices to be controlled from a common serial bus. This eliminates the need for separate chip-select control lines between each device and the host controller. Up to six general purpose outputs are provided, which can be used to access internal signals (the LOCK signal, for example) or to control front end components. RFFC5071 operates with a 2.7V to 3.3V power supply.
|Mixer RF Min(MHz)||30|
|Mixer RF Max(MHz)||6,000|
|Mixer IF Min(MHz)||30|
|Mixer IF Max(MHz)||6,000|
|Phase Noise @ 2 GHz (1kHz)(dBc/Hz)||-90|
|Phase Noise @ 2 GHz (10kHz)(dBc/Hz)||-102|
|Package(mm)||5 x 5|