ACT88911
Highly Integrated Power Management IC (PMIC) with Five Buck, Two Buck-boost, Two Boost Regulators, and Ten LDOs for Vision and Advanced Processors
Key Features
- Wide input voltage range: 2.7 V to 5.5 V
- Integrated power solution with:
- 5 Buck switching regulators (two configurable for 10 A dual-phase operation)
- 2 Buck-Boost regulators (1 A output each)
- 2 Boost regulators (up to 30 mA for LED drive, max 20 V output)
- 10 Linear regulators (LDOs) and load switches with currents up to 1.5 A
- High efficiency Buck with ACOT control architecture for low ripple and fast transient response
- 12 configurable GPIO pins for system control, interrupts, LED drive, and more
- Configurable startup sequencing, sleep modes, and dynamic voltage scaling (DVS)
- I2C interface for flexible system-level configuration and monitoring
- Multiple fault protections: undervoltage, overvoltage, overcurrent, thermal warnings, and shutdown
- Autonomous LED blink and breathe modes for LED control
- Pin configurable I2C addresses and watchdog timer support
The ACT88911 is a highly integrated multi-rail power management IC designed to deliver a complete power solution for advanced processors and system-on-chip applications. It features five buck regulators (two configurable for dual-phase operation up to 10A), two buck-boost regulators, two boost regulators for LED drive, and ten linear regulators/load switches, all in a compact 3.76 x 4.16 mm package. With a wide input voltage range of 2.7V to 5.5V, the device supports flexible power sequencing, dynamic voltage scaling, and multiple low power modes to optimize system efficiency and performance. The integrated master controller enables precise startup/shutdown sequencing and fault monitoring, while the I2C interface allows full programmability without hardware changes. Its configurable GPIOs provide additional system control, LED driving, and interrupt capabilities. Ideal for portable multimedia, AI/AR/VR, FPGA, and computer vision applications, the ACT88911 simplifies power system design with minimal external components and high efficiency.
Typical Applications
- Portable Audio and Video Devices
- AI, AR, and VR Systems
- FPGA Power Management
- Computer Vision Systems
Product Categories
| Application Processors | General purpose, Ambarella, Socionext, Omnivision |
| Battery Charger | No |
| Regulated Outputs | 19 |
| Min Input Voltage(V) | 2.7 |
| Max Input Voltage(V) | 5.5 |
| Pin Count | 90-ball WLCSP |
| Operating Junction Temperature(C) | -40 to 125 |
| Buck Converters | 5 |
| Bucks Configurable as Load Switch | Yes (2 dual-phase) |
| Boost Converters | 2 |
| Buck-Boost Converters | 2 |
| LDO Regulators | 10 |
| LDOs Configurable as Load Switch | Yes |
| Interface | I2C |
| Package Type | WLCSP |
| Package(mm) | 3.76 x 4.16 |
| RoHS | Yes |
| Lead Free | Yes |
| Halogen Free | Yes |
| ITAR Restricted | No |
| ECCN | EAR99 |
ACT88911EVK1-101 Evaluation Kit
ACT88911EVK1-101 Evaluation Tool User Guide
The Evaluation Tool Users Guide describes the characteristics and operation of the Qorvo ACT88911EVK1-101 evaluation kit (EVK). It provides setup and operation instructions, schematic, layout, BOM, and test data.
To communicate with the EVK a USB Dongle and a Graphical User Interface (GUI) is provided.
This EVK demonstrates the ACT88911-101 ActivePMU power management IC.
ACT88911 GUI
The ACT88911 EVK Graphical User Interface (GUI) is packaged in a ZIP file that includes the software and all necessary drivers to communicate with the ACT88911 Evaluation Tool, as well as all descriptions how to use the tool.