QPA9126
High Linearity Gain Block
Key Features
- 1 - 6 GHz operational
- Internally matched to 50 ohms
- 0.3 dB Gain flatness over 400 MHz band width
- 16 dB gain
- 35 dBm output IP3
- 20 dBm P1dB
- 1.4 dB noise figure
- 1.8 V Logic compatible shutdown control
The QPA9126 is a cascadable, high linearity gain block amplifier in a low-cost surface mount package. At 3.5 GHz, the amplifier provides 16 dB gain, +35.5 dBm OIP3 and 1.4 dB Noise Figure while drawing 70 mA current from a 5V supply.
The QPA9126 provides very flat gain across a broad range of frequencies with the integration of a shut-down biasing capability to allow for operation for TDD applications. The low noise figure and high linearity performance allows the device to be used in both receiver and transmitter chains for high performance systems. The internal active bias circuit also enables stable operation over bias and temperature variations and can be biased from a single positive supply ranging from +3.3 to +5 volts. The amplifier is internally matched using a high-performance E-pHEMT process and is housed in a small 2 x 2 mm surface-mount package.
The QPA9126 covers the 1 - 6 GHz frequency band and is targeted for wireless infrastructure or other applications requiring high linearity and/or low noise figure.
Typical Applications
- 5G m-MIMO
- Mobile Infrastructure
- Repeater / DAS
- General Purpose Wireless
- TDD / FDD System
- Defense Communication
Product Categories
| Frequency Min(MHz) | 1,000 |
| Frequency Max(MHz) | 6,000 |
| Gain(dB) | 16 |
| OP1dB(dBm) | 20 |
| OIP3(dBm) | 35 |
| NF(dB) | 1.4 |
| Voltage(V) | 5 |
| Current(mA) | 68 |
| Package Type | DFN |
| Package(mm) | 2 x 2 |
| RoHS | Yes |
| Lead Free | Yes |
| Halogen Free | Yes |
| ITAR Restricted | No |
| ECCN | 5A991G |